Hi Aron
The guide shown in previous post works but not the test code, all that needs to be done to start the process when the Raspberry boots is to add the line to rc.local shown below just after the lines added in the above guide and before the exit 0 line, the full path has to be given or it doesn’t work
sudo python /usr/bin/test-watchdog.py
I had the problem that there was no delay when the process stopped, this was found to be a PCB track fault, set 2 on the MAX6369 was not connected (set 2 had no volts on it) I mention this in case it isn’t a one off and other boards may have the same fault
