[Dale, KC2CBD]

You could read the ACC RC850 Operator’s Manual in Section 12 on Paging.
The manuals are on the Repeater Builders website.

[Dale, KC2CBD]

2 Weeks and no answer?
Thanks

[Dale, KC2CBD]

Are we going to get a new version of ORP soon?

[Dale, KC2CBD]

All of the mods I’ve seen are using Pin 13 for PTT which is GPIO3 and Pin 48 for COS which is VOLDN.
I was kinda hoping there was a way to do it with Version 2.1.2.
I really didn’t want to do a custom build because of other projects on my plate.

Thanks
Dale, KC2CBD

[Dale, KC2CBD]

Can we follow the convention of ACC RC-850?

The RC-850 uses prefix 2 for Paging and then a 2 digit number for the individual pager.
The RC-850 allows from 00-53 for pager memories but with ORP we could probably increase that.
It would be nice to have user “slots” where such information would be easy for users to use.

Motorola QC2 is suppose to be incorporated into SVXLink per changelog but I don’t see it in the svxlink wiki.
https://github.com/sm0svx/svxlink/wiki/ModuleSelCallEnc

So with a paging module it would be nice to set macros for QC2 using dtmf prefix 2.
I believe this can be done but I’m not good at programming.

Thanks
Dale, KC2CBD

[Dale, KC2CBD]

Looks like Selective Calling is implemented in SvxLink.

<http://www.svxlink.org/doc/man/man5/ModuleSelCallEnc.conf.5.html&gt;

The question is can it be accessed via dtmf commands.

Dale
KC2CBD

[Dale, KC2CBD]

Is there not a way for G4KLX’s software on MMDVM do the digital side and then it would be just a matter of detecting analog or digital?

Dale
KC2CBD

[Author]

Posts