5B4AKV

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 5B4AKV
    User

    Dear Aaron ,

    Thank you for the help.

    Yes the RICK is working as the bidirectional controller.
    Yes I should try to make it manually. Because I am not fluent in PHP.

    but thank you though !

    never the less I was hopping to just use open repeater to control 2 relays to enable and disable the link ( that’s why I needed only the RX part for DTMF decoding ) anyhow , I will see what I can come up with and also post my solution soon I hope 😀

    Thank you in advance
    5B4AKV.

    5B4AKV
    User

    Dear Aaron ,
    I am sorry if I made it confusing.
    My setup is currently 2 Radios V/U in crossband mode ( I have a Motorola RICK in between them that does the full duplex )
    and I want to decode DTMF codes from both radios to trigger relays to enable and disable the link.
    there are 2 approaches to this.( as I see it )
    1. make the logic and everything though open repeater and ditch all the analogue stuff( Motorola RICK controller )
    2. keep the analogue stuff as as because I know they work and just let the DTMF decoding to open repeater and the announcements for signaling to the users(and the Relays to connect the link).

    Now in both situations I need to modify the DTMF codes and find a way to make each channel to use different DTMF codes to activate and deactivate the link ( this is done though hardware with the relays if option 2 is used or software wise if option 1 is selected )

    I hope is a bit clearer now.

    Thank you in advance

    5B4AKV

Viewing 2 posts - 1 through 2 (of 2 total)