Home › Forums › Hardware › Use with two FT2900R's ?

Viewing 1 post (of 1 total)
  • Author
    Posts
  • September 10, 2015 at 8:36 pm #1395
    Aaron, N3MBH
    Forum Administrator

    Greetings and welcome to the forums. I would assume that you’d be using one Yaesu FT-2900R as your receive and one as your transmit. If that is so, then you are fine with one Easy Digi. You may need to add some inline attenuation resistors if needed. I would also recommend trying to pull a COS line off the receive radio, or you may need to modify it to get a COS line. Then build a simple COS circuit to active the RX GPIO pin. This is much more reliable then using the software vox. Hope this is of help.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

  • Author
    Posts
Viewing 1 post (of 1 total)
  • The topic ‘Use with two FT2900R's ?’ is closed to new replies.