Home › Forums › Hardware › SvxLink Card Printed Boards

Viewing 1 post (of 1 total)
  • Author
    Posts
  • October 17, 2016 at 2:07 pm #1947
    Aaron, N3MBH
    Forum Administrator

    Juan did the initial design of the SVXLink board which will work with SVXLink or ORP. I know the schematic is available, but I don’t know that the board CAD files are. I know Richard is prototyping another board with a simpler design and less components. I have seen a picture of it, but haven’t had the opportunity to talk to him about it or test it in greater detail. Ready made hardware is still in the early days, it is sort of a experimentation and proving period. Time and demand will dictate the board design evolution. It would certainly be nice to have a premade board option available where it can just be purchase and wire it up and go.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

  • Author
    Posts
Viewing 1 post (of 1 total)
  • The forum ‘Hardware’ is closed to new topics and replies.