Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 30, 2015 at 5:35 pm #1166
    Rares, YO2LSQ
    User

    This is what I could think so far:

    1. On dashboard make a block for Echolink status (connected, users, network ok etc). Maybe a block for network info: IP, GW, Route etc.. Refresh dashboard via Ajax
    2. On Echolink menu, make test call button. Allow simplex mode too
    3. Restart services buttons and services status for echolink, lighthttp etc
    4. Soundcard device info, loopback test button, volumes
    5. Make system settings page: Timezone, Units for temperature (F/C)
    6. Redirect from port 80 to 443 in case you forget to put https:// in the URL

    73!
    Rares

    August 1, 2015 at 5:10 pm #1184
    Aaron, N3MBH
    Forum Administrator

    Hello Rares,
    Thanks for the feedback. These are all great suggestions.

    I do have some plans for other features and improvements. Some very similar to your suggestions. We have discussed adding configuration modes to it can be setup as duplex repeater or a simplex node. I also have some updates to identification preferences in the works. We also were discussing adding a script to GREP all the sound card devices so that they can be put into an array for front end selection in the ports tab. More ports, ie for link radios are yet to come so we are working to build the framework for that.

    We plan to add some buttons to start/stop svxlink services as well as reboot the device. We also want to build GUI pages to configure things like Time Setting, Hostname, Network/IP Settings, etc. Ultimately we would like to see the need for SSH to pretty much go away.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The topic ‘Suggestions after first use’ is closed to new replies.