Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 14, 2016 at 10:01 am #1627
    Devan, KD8MST
    User

    I currently have a Raspberry Pi 2 Model B running the software for my 6 Meter Repeater controller I had to do quite a few modifications to the config files to make it do what I want but hey I got there anyway… What I was wondering is if the same software will run ok on my Raspberry Pi 1 Model B. this way I have a backup controller if something should happen to the first.
    Thank you,
    Devan (KD8MST)

    February 24, 2016 at 8:06 am #1651
    Devan, KD8MST
    User

    any chance there is an older version kicking around that i could use on PI1

    February 24, 2016 at 7:10 pm #1655
    Aaron, N3MBH
    Forum Administrator

    Sorry about that, I thought I had replied to your thread. The only IMG that is available is the 1.0.0 version which I wouldn’t recommend because it had a custom Debian jessie base for the RPI2. You may have better luck with the current 1.1.0 version as it is running Raspbian. I may work on the older Pi, but I don’t have a working one anymore to try. You are welcome to give it a shot and report back, but there are no guarantees. I’ve experience audio stutter on the older Pi with an earlier version of svxlink when first starting the project. Seemed to be either under powered or issues with the USB integration.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.