Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • August 21, 2015 at 12:04 pm #1318
    Roberto, IZ0RIM
    User

    Hello
    I managed to get this far .
    This is my log:

    Fri Aug 21 10:42:58 2015: Using configuration file: /etc/openrepeater/svxlink/svxlink.conf
    Fri Aug 21 10:42:58 2015: — Using sample rate 16000Hz
    Fri Aug 21 10:42:58 2015:
    Fri Aug 21 10:42:58 2015: Starting logic: RepeaterLogic
    Fri Aug 21 10:42:58 2015: Loading RX: Rx1
    Fri Aug 21 10:42:58 2015: Loading TX: Tx1
    Fri Aug 21 10:42:58 2015: Loading module “ModuleEchoLink” into logic “RepeaterLogic”
    Fri Aug 21 10:42:58 2015: Module EchoLink v1.3.1 starting…
    Fri Aug 21 10:42:58 2015: RepeaterLogic: Event handler script successfully loaded.
    Fri Aug 21 10:42:59 2015: EchoLink directory status changed to ON
    Fri Aug 21 10:43:00 2015: — EchoLink directory server message: —
    Fri Aug 21 10:43:00 2015: EchoLink Server v2.5.9997
    Fri Aug 21 10:43:00 2015:
    Fri Aug 21 10:43:00 2015: ECHOEC2-3: Herndon, VA USA
    Fri Aug 21 10:43:00 2015:
    Fri Aug 21 10:50:00 2015: RepeaterLogic: Sending short identification…
    Fri Aug 21 10:50:00 2015: Tx1: Turning the transmitter ON
    Fri Aug 21 10:50:09 2015: Tx1: Turning the transmitter OFF
    Fri Aug 21 11:00:00 2015: RepeaterLogic: Sending short identification…
    Fri Aug 21 11:00:00 2015: Tx1: Turning the transmitter ON
    Fri Aug 21 11:00:09 2015: Tx1: Turning the transmitter OFF

    I don’t find my name on the echolink repeaters’s list
    What should I do more ?

    August 21, 2015 at 12:32 pm #1320
    Aaron, N3MBH
    Forum Administrator

    Greetings RIM,
    And Welcome to the forums and thanks for your interest in the project. Looks like you have everything up and running correctly as it is showing no errors with your RX and TX and it looks like it is logging you into the Echolink servers. If you are not showing up in the directory even after some time, my guess would be that you do not have your routing on your network configured correctly. There is a brief explanation on the EchoLink settings page in the GUI or your can find more info here: http://www.echolink.org/firewall-friendly.htm

    Let us know if that works for you.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

    August 21, 2015 at 12:41 pm #1322
    Roberto, IZ0RIM
    User

    Hello
    Thank you for your reply
    It is really strange
    this is my new log:
    Fri Aug 21 11:09:27 2015: — EchoLink info message received from VE9BEL —
    Fri Aug 21 11:09:27 2015: Station VE9BEL
    Fri Aug 21 11:09:27 2015:
    Fri Aug 21 11:09:27 2015: Bernard
    Fri Aug 21 11:09:27 2015:
    Fri Aug 21 11:09:27 2015: Edmundston, N.-B.
    Fri Aug 21 11:09:27 2015:
    Fri Aug 21 11:09:27 2015: iPhone
    Fri Aug 21 11:09:43 2015: Tx1: Turning the transmitter OFF
    Fri Aug 21 11:10:29 2015: VE9BEL: EchoLink QSO state changed to DISCONNECTED
    Fri Aug 21 11:10:29 2015: RepeaterLogic: Deactivating module EchoLink…
    Fri Aug 21 11:10:29 2015: Tx1: Turning the transmitter ON
    Fri Aug 21 11:10:36 2015: Tx1: Turning the transmitter OFF

    I opened all ports to Rasp , I did the DMZ .
    If that colleague WE9… has connected , it means that there is my name in the list .
    but I do not see it
    strange is really strange !

    August 21, 2015 at 1:03 pm #1325
    Aaron, N3MBH
    Forum Administrator

    If you post your node call, I will check on my phone.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

    August 26, 2015 at 3:53 am #1358
    Roberto, IZ0RIM
    User

    Good morning
    I enclose my log that demonstrates the use of a ham .
    Unfortunately I do not see my call list .
    My call is iz0rim – r
    There are no firewall issues because I did the test with EchoLink for windows .
    I think that the problem is in the configuration of mycall but I can not find the file path with SSH .
    I hope that we find the solution .
    Thank you

    `17:29:30 2015: EchoLink Server v2.5.9997
    Tue Aug 25 17:29:30 2015:
    Tue Aug 25 17:29:30 2015: ECHOEC2-1: Herndon, VA USA
    Tue Aug 25 17:29:30 2015:
    Tue Aug 25 20:49:42 2015: Incoming EchoLink connection from KK4MKE (Donna) at 50.149.160.117
    Tue Aug 25 20:49:42 2015: EchoLink: Using GSM codec only
    Tue Aug 25 20:49:42 2015: Tx1: Turning the transmitter ON
    Tue Aug 25 20:49:42 2015: RepeaterLogic: Activating module EchoLink…
    Tue Aug 25 20:49:42 2015: KK4MKE: Accepting connection. EchoLink ID is 793235…
    Tue Aug 25 20:49:42 2015: KK4MKE: EchoLink QSO state changed to CONNECTED
    Tue Aug 25 20:49:42 2015: — EchoLink info message received from KK4MKE —
    Tue Aug 25 20:49:42 2015: Station KK4MKE
    Tue Aug 25 20:49:42 2015:
    Tue Aug 25 20:49:42 2015: Donna
    Tue Aug 25 20:49:42 2015: Tennessee
    Tue Aug 25 20:49:42 2015:
    Tue Aug 25 20:50:06 2015: Tx1: Turning the transmitter OFF
    Tue Aug 25 20:51:38 2015: KK4MKE: EchoLink QSO state changed to BYE_RECEIVED
    Tue Aug 25 20:51:38 2015: KK4MKE: EchoLink QSO state changed to DISCONNECTED
    Tue Aug 25 20:51:38 2015: RepeaterLogic: Deactivating module EchoLink…
    Tue Aug 25 20:51:38 2015: Tx1: Turning the transmitter ON
    Tue Aug 25 20:51:46 2015: Tx1: Turning the transmitter OFF

    August 27, 2015 at 12:41 am #1361
    Aaron, N3MBH
    Forum Administrator

    I will see what I can do to look into it. It works fine on my BBB. I will have to try it on my RPI2. I see you are making connections. Are you just not showing up in the directory server?

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

    August 27, 2015 at 4:18 am #1362
    Roberto, IZ0RIM
    User

    In fact there were other connections, who knows that callsign is viewed online.
    Do you think you can do a search based on IP ?

    August 27, 2015 at 10:39 pm #1363
    Aaron, N3MBH
    Forum Administrator

    I tried again tonight also. Tonight I gave it a go on my Raspberry Pi 2 using the beta 3 image. All worked as expected after some delays with the Echolink system updating my password change. I was able to connect to it with my phone via both on wifi inside my network and outside my network on cellular data.

    Best I can tell from your previous logo, it looks like you are connecting OK and people can connect to you. Yes you do show up in the directory. I don’t believe you can search stations by IP address in the directory, only by Node Number and Callsign…aside from just browsing through the list of thousands of connections. Echolink can seem a little buggy at points, especially getting everything configured right and the firewall setup properly.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

    August 28, 2015 at 6:51 am #1365
    Roberto, IZ0RIM
    User

    ok
    I will try to install again

    September 7, 2015 at 10:19 am #1384
    Aaron, N3MBH
    Forum Administrator

    There may be some issue with core system reading the correct echolink config files built by the front end. We are looking into it and should have it ironed out in the next release.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • The topic ‘EchoLink Connection…And now?’ is closed to new replies.