Randy, N4UUJThanks Dan, I will need to refine my audio setting, but they are working for now. The repeater ID’s are very readable and at a good level. Is this a good standard for rough setting of my levels and replies from echolink?
I can activate Echolink but I cannot connect to my repeater from another computer or I cannot connect to another node from my repeater. N4UUJ-R shows as active on Echolink station list. It says connecting but times out and never connects….according to the repeater log. I can connect to 9999# the echolink echo test conference server and it will echo back. Does that mean it is able to connect and setup is correct. In my past experience with Echolink I thought that was a test for a working configuration for Echolink.
My hardware question is: will I use two radios, like a standard repeater, to have an Echolink link to a local repeater. It seems that would cause an endless loop as I have read. What configuration would I want. Would be the same for a crossband configuration. You had mentioned changing to simplex in the software. Or does the software take care of the loop problem.