Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 28, 2021 at 12:24 pm #3330
    Klaus, OE4KMU
    User

    Hi,
    I would like to permanently couple two 23cm relays with each other. With SvxReflector that should be possible.
    How can I configure this in OpenRepeater?
    Both relays use the OpenRepeater software 2.2.0 (dev)
    It would be great if someone could help me how to configure it.
    73s Klaus, OE4KMU

    March 9, 2021 at 10:50 am #3337
    Aaron, N3MBH
    Forum Administrator

    Hello Klaus,
    This function is not built into ORP just yet, but it is on my todo list after getting 3.0 released. From the config side to write out the files it would currently involve hard coding some PHP to write the config. 2.2.0, already contains part of the linking functionality via the temporary dev_ui. The [ReflectorLogic] sections are not there yet. I believe that there may be some custom compiling of SVXLink or SvxReflector, but I am not completely certain as I’ve not really had a chance to dig into this yet. It’s on my to do list, so if you make any headway, or want to help get it built into ORP, please let me know. Thanks.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

    March 21, 2021 at 10:14 am #3386
    Klaus, OE4KMU
    User

    Hello Aaron,
    It would be great if you could include this module in the next image.
    In the meantime I have successfully interconnected the two repeaters manually with the SVXReflector.

    73s Klaus, OE4KMU

    March 25, 2021 at 12:06 am #3387
    Aaron, N3MBH
    Forum Administrator

    It’s on my todo list.

    73,
    Aaron – N3MBH / WRFV871

    OpenRepeater is offered free of charge. Find out how you can support us.

    November 27, 2024 at 5:43 pm #3729
    Roland, PD2RLD
    User

    Hello Aaron and others,

    I allmost end in tears and frustration, so I’m gonna ask for help…

    I have two repeaters on different locations, running ORP. Each repeater has a receiver and transmitter and connected by wires to the GPIO. Each repeater has his own frequency. On both locations is a good internet connection by the way.

    I would like to link these repeaters together, but how do I setup a simple link? I found an example of a audio-only stream, but that’s not what I’m looking for. It ends up only with errors by now.

    remotetrx, ReflectorLogic, RepeaterLogic, I missed something..

    73, Roland.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.